EasyManuals Logo

Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Juniper JUNOSE 11.2.X BGP AND MPLS
742 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #669 background imageLoading...
Page #669 background image
Route Target: RT:100:1 (both)
Flood Next Hop: Index 1048577
MPLS next-hop: 20, label 46, resolved by MPLS next-hop 19
MPLS next-hop: 19, resolved by MPLS next-hop 17, peer 2.2.2.2
MPLS next-hop: 17, label 82 on ATM2/0.10, nbr 10.10.10.2
Interface Port Status
------------------------- ------ ------------
FastEthernet3/1 1 Up
vpls vpls1 2 Up
Connections status code:
UP = Operational
SC = Local and Remote Site Identifier Collision
EM = Encapsulation Mismatch
OR = Out of Range
DN = VC Down because Remote PE Unreachable
LD = Local Site Down
RD = Remote Site Down
AS = Max BGP AS path length exceeded
OL = No Out Label
Site State Remote PE In-label Out-label MPLS NH Idx Up-down Time
----- ----- --------------- -------- --------- ----------- ------------
2 UP 2.2.2.2 17 46 20 00:02:56
BridgeGroup: vpls2(vpls)
Bridge Mode: default
Aging Time: 300 secs
Learning: Enabled
Max Learn: Unlimited
Link Status Snmp Traps: Disabled
Subscriber Policy: default Subscriber
Port Count: 2
Interface Count: 1
Transport Virtual Rtr: pe1
Route Distinguisher: 1.1.1.1:10
SiteName: westford
SiteId: 1
SiteRange: 20
VPLS Route Targets
Route Target: RT:100:2 (both)
Flood Next Hop: Index 1048578
MPLS next-hop: 21, label 56, resolved by MPLS next-hop 19
MPLS next-hop: 19, resolved by MPLS next-hop 17, peer 2.2.2.2
MPLS next-hop: 17, label 82 on ATM2/0.10, nbr 10.10.10.2
Interface Port Status
------------------------- ------ ------------
ATM2/0.12 1 Up
vpls vpls2 2 Up
Connections status code:
UP = Operational
SC = Local and Remote Site Identifier Collision
EM = Encapsulation Mismatch
OR = Out of Range
DN = VC Down because Remote PE Unreachable
LD = Local Site Down
RD = Remote Site Down
AS = Max BGP AS path length exceeded
OL = No Out Label
Site State Remote PE In-label Out-label MPLS NH Idx Up-down Time
----- ----- --------------- -------- --------- ----------- ------------
2 UP 2.2.2.2 27 56 21 00:02:56
Meaning Table 131 on page 634 lists the show vpls connections command output fields.
633Copyright © 2010, Juniper Networks, Inc.
Chapter 13: Monitoring VPLS

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOSE 11.2.X BGP AND MPLS and is the answer not in the manual?

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General IconGeneral
BrandJuniper
ModelJUNOSE 11.2.X BGP AND MPLS
CategorySoftware
LanguageEnglish

Related product manuals