2- 60 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Command Summary
Reading Source/Measure Data
Table 2-13 READ Subsystem
Command Summary Reset setting
:READ:ARR? [chanlist]
Executes the :INIT command and the
:FETC:ARR? command in series, and
returns the array data which contains all
data for the element specified by the
:FORM:ELEM:SENS command.
chanlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
:READ:ARR:CURR? [chanlist]
:READ:ARR:RES? [chanlist]
:READ:ARR:SOUR? [chanlist]
:READ:ARR:STAT? [chanlist]
:READ:ARR:TIME? [chanlist]
:READ:ARR:VOLT? [chanlist]
Executes the :INIT command and the
:FETC:ARR:<CURR|RES|SOUR|STAT|
TIME|VOLT>? command in series, and
returns the array data which contains all
data for the element specified by CURR,
RES, SOUR, STAT, TIME, or VOLT.
chanlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
:READ[:SCAL]? [chanlist]
Executes the :INIT command and the
:FETC? command in series, and returns
the latest data for the element specified by
the :FORM:ELEM:SENS command.
chanlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
:READ[:SCAL]:CURR? [chanlist]
:READ[:SCAL]:RES? [chanlist]
:READ[:SCAL]:SOUR? [chanlist]
:READ[:SCAL]:STAT? [chanlist]
:READ[:SCAL]:TIME? [chanlist]
:READ[:SCAL]:VOLT? [chanlist]
Executes the :INIT command and the
:FETC:<CURR|RES|SOUR|STAT|TIME|
VOLT>? command in series, and returns
the latest data for the element specified by
CURR, RES, SOUR, STAT, TIME, or
VOLT.
chanlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
To Next Page
Loading...
