4- 74 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Commands
PROGram Subsystem
PROGram Subsystem
For the numeric suffix [h], see “Numeric Suffix” on page 1-8.
:PROGram:CATalog?
Returns the names of all programs defined in the program memory.
Even if a name is selected by the :PROGram[:SELected]:NAME command, this
command does not return the name if the program is empty.
Syntax :PROGram:CATalog?
Query response program_names <newline>
program_names returns the names of all programs defined in the program memory.
Response data type is AARD.
Example :PROG:CAT?
:PROGram:PON:COPY
Specifies the power-on program.
Syntax :PROGram:PON:COPY name
Parameter name Name of the program used for the power-on program.
Parameter data type is SPD.
Example :PROG:PON:COPY “program1”
:PROGram:PON:DELete
Clears the power-on program.
Syntax :PROGram:PON:DELete
Example :PROG:PON:DEL
To Next Page
Loading...
