Keysight Technologies B2961A Command Reference

4- 40 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Commands
LXI Subsystem
• WaitingForAcquireArm2
• WaitingForAcquireTrigger1
• WaitingForAcquireTrigger2
• WaitingForTransitionArm1
• WaitingForTransitionArm2
• WaitingForTransitionTrigger1
• WaitingForTransitionTrigger2
• Measuring1
• Measuring2
• Settling1
• Settling2
slope Slope attribute. POSitive|NEGative. Parameter data type is
CPD.
drive Drive behavior. OFF|NORMal|WOR. Parameter data type is
CPD. See
“:LXI:EVENt[:OUTPut]:LAN[:SET]:DRIVe” on
page 4-41.
destination Destination. String enclosed in quotes. You can use letters
(A–Z, a–z), numbers (0–9), and printable characters like "@",
"%", "*", etc. Parameter data type is SPD.
Example :LXI:EVEN:LAN:CONF “LAN0”,ON,”WaitingForAcquireTrigger1”,POS,NORM,
”ALL:5044”
:LXI:EVENt[:OUTPut]:LAN[:SET]:DESTination
Sets the destination for the specified outgoing LAN event to the hosts specified by
<strDestExpression>. The expression takes the form of “host1:port1, host2:port2, ”.
The port numbers are optional and will default to the IANA assigned TCP port
(5044).
Syntax :LXI:EVENt[:OUTPut]:LAN[:SET]:DESTination strLanEvent, strDestExpression
:LXI:EVENt[:OUTPut]:LAN[:SET]:DESTination? strLanEvent
Parameter strLanEvent LAN event name. String enclosed in quotes. Parameter data
type is SPD.

Keysight Technologies B2961A Specifications

General

Brand	Keysight Technologies
Model	B2961A
Category	Portable Generator
Language	English