Keysight Technologies B2961A - PROGram Subsystem

Keysight B2961A/B2962A SCPI Command Reference, Edition 6 2- 69
Subsystem Command Summary
Using Advanced Functions
Table 2-20 PROGram Subsystem
:MMEM:STOR:MACR macro,file_name
Saves the macro to the specified file in
the current directory.
macro: Name of macro.
file_name: Name of the file to save the
macro.
:MMEM:STOR:STAT file_name
Saves the instrument setup to the
specified file in the current directory.
file_name: Name of the file to save the
instrument setup.
:MMEM:STOR:TRAC file_name[,chlis
t]
Saves all data in the trace buffer for the
specified channel to the specified file in
the current directory.
file_name: Name of the file to save the
specified data.
chlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
(@1) for
1-ch models
(@1,2) for
2-ch models
Command Summary Reset setting
:PROG:CAT?
Returns the names of all programs
defined in the program memory.
:PROG:PON:COPY name
Specifies the power-on program.
name: Name of the program used for the
power-on program.
:PROG:PON:DEL
Clears the power-on program.
:PROG:PON:RUN mode
Enables or disables the power-on
program.
mode=1|ON|0|OFF
OFF
Command Summary Reset setting