2- 68 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Command Summary
Using Advanced Functions
:MMEM:RDIR directory
Removes the specified empty directory.
directory=<path>|USB:\<path>
:MMEM:STOR:ARB:CURR:UDEF file[,c
hlist]
:MMEM:STOR:ARB:VOLT:UDEF file[,c
hlist]
Saves the user defined arbitrary
waveform data to the specified file in the
current directory.
file: Name of the file to save the specified
data.
chlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
:MMEM:STOR:DATA[:ALL] file[,chli
st]
:MMEM:STOR:DATA:MATH file[,chlis
t]
:MMEM:STOR:DATA:SENS file[,chlis
t]
Saves the math expression result data,
sense data, or all of these data for the
specified channel to the specified file in
the current directory.
file: Name of the file to save the specified
data.
chlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
(@1) for
1-ch models
(@1,2) for
2-ch models
:MMEM:STOR:LIST:CURR file[,chlis
t]
:MMEM:STOR:LIST:VOLT file[,chlis
t]
Saves the list sweep data to the specified
file in the current directory.
file: Name of the file to save the specified
data.
chlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
Command Summary Reset setting
To Next Page
Loading...
