Keysight Technologies B2961A Command Reference

Keysight B2961A/B2962A SCPI Command Reference, Edition 6 4- 41
Subsystem Commands
LXI Subsystem
strDestExpression Destination. String enclosed in quotes. You can use letters
(A–Z, a–z), numbers (0–9), and printable characters like "@",
"%", "*", etc. Parameter data type is SPD.
Query response strDestExpression <newline>
strDestExpression returns the Destination Expression string. Response data type is
SRD.
Example :LXI:EVEN:LAN:DEST “LAN0”,”ALL:5044”
:LXI:EVEN:LAN:DEST? “LAN0”
:LXI:EVENt[:OUTPut]:LAN[:SET]:DRIVe
Specifies the trigger drive behavior for the specified LAN output event.
Syntax :LXI:EVENt[:OUTPut]:LAN[:SET]:DRIVe strLanEvent, drive
:LXI:EVENt[:OUTPut]:LAN[:SET]:DRIVe? strLanEvent
Parameter strLanEvent LAN event name. String enclosed in quotes. Parameter data
type is SPD.
drive Drive behavior. OFF (default)|NORMal|WOR. Parameter data
type is CPD.
OFF disables the LAN event.
NORMal designates typical operation where both edges of the instrument event are
transmitted.
WOR (Wired.OR) causes only one edge to be transmitted.
Query response drive <newline>
drive returns a string representing the drive behavior. Response data type is CRD.
Example :LXI:EVEN:LAN:DRIV “LAN0”,WOR
:LXI:EVEN:LAN:DRIV? “LAN0”
:LXI:EVENt[:OUTPut]:LAN[:SET]:ENABle
Enables or disables the specified LXI LAN output event.

Keysight Technologies B2961A Specifications

General

Brand	Keysight Technologies
Model	B2961A
Category	Portable Generator
Language	English