Keysight Technologies B2961A Command Reference

Keysight B2961A/B2962A SCPI Command Reference, Edition 6 4- 181
Subsystem Commands
SYSTem Subsystem
:SYSTem:SET
Sends or loads the instrument setup data.
Syntax :SYSTem:SET data
:SYSTem:SET?
Parameter data Instrument setup data. Parameter data type is a definite length
arbitrary binary block.
Query response Response is a definite length arbitrary binary block.
:SYSTem:TIME
Sets the time of the internal clock. This command setting is not changed by power
off or the *RST command.
Syntax :SYSTem:TIME hour, minute, second
:SYSTem:TIME?
Parameter hour Hour. Integer from 0 to 23. Parameter data type is NR1.
minute Minute. Integer from 0 to 59. Parameter data type is NR1.
second Second. Integer from 0 to 59. Parameter data type is NR1.
Query response response <newline>
response returns hour, minute, second. Each value is separated by a comma.
Response data type is NR1.
Example :SYST:TIME 23,59,59
:SYSTem:TIME:TIMer:COUNt?
Returns the present count of the timer.
Syntax :SYSTem:TIME:TIMer:COUNt?
Query response response <newline>
response returns the present timer count. Response data type is NR3.

Keysight Technologies B2961A Specifications

General

Brand	Keysight Technologies
Model	B2961A
Category	Portable Generator
Language	English