4- 34 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Commands
LXI Subsystem
:LXI:EVENt:LOG:ALL?
Returns the contents of the event log. A complete log is a set of entries delimited by
a semicolon. The contents of the event log are returned as a single quoted string
containing all the event log entries. This is a non-destructive read.
Syntax :LXI:EVENt:LOG:ALL?
Query response log <newline>
log returns the contents of the event log. Response data type is SRD.
Example :LXI:EVEN:LOG:ALL?
:LXI:EVENt:LOG:CIRCular[:ENABle]
Selects how new entries are handled when the LXI event log is full.
Syntax :LXI:EVENt:LOG:CIRCular[:ENABle] status
:LXI:EVENt:LOG:CIRCular[:ENABle]?
Parameter status Circular logging status. 0|OFF|1|ON (default). Parameter data
type is boolean.
Query response status <newline>
status returns an integer (0 or 1) indicating the behavior of the LXI event log.
Response data type is boolean.
Example :LXI:EVEN:LOG:CIRC ON
:LXI:EVEN:LOG:CIRC?
:LXI:EVENt:LOG:CIRCular:FBEntry
Selects the most recently added event log entry to be used as the reference for
:LXI:EVENt:LOG:ENTRy?. The log must be in circular mode for the command to
function.
Syntax :LXI:EVENt:LOG:CIRCular:FBEntry
Example :LXI:EVEN:LOG:CIRC:FBE
To Next Page
Loading...
