Keysight Technologies B2961A Command Reference

Keysight B2961A/B2962A SCPI Command Reference, Edition 6 4- 105
Subsystem Commands
SOURce Subsystem
Parameter data Ramp waveform end level. value (see “Source Output Ranges”
on page 2-36) |MINimum|MAXimum|DEFault (default is 0.0).
Parameter data type is NRf+. Query does not support
data=value.
Query response response <newline>
response returns the present setting. If a parameter is specified, response returns the
value assigned to DEF, MIN, or MAX. Response data type is NR3.
Example :ARB:CURR:RAMP:END 1E-3
:SOUR2:ARB:CURR:RAMP:END?
[:SOURce]:ARB:<CURRent|VOLTage>:RAMP:END:T
IME
Sets the end time of the current or voltage ramp waveform output. Waveform period
must not exceed 1000 seconds.
Syntax [:SOURce[c]]:ARB:<CURRent|VOLTage>:RAMP:END:TIME time
[:SOURce[c]]:ARB:<CURRent|VOLTage>:RAMP:END:TIME? [time]
For <CURRent|VOLTage>, specify CURRent for current output or VOLTage for
voltage output.
Parameter time Ramp waveform end time, in seconds. value (0 to 1000)|
MINimum|MAXimum|DEFault (default is 0). Parameter data
type is NRf+. Query does not support time=value.
Query response response <newline>
response returns the present setting. If a parameter is specified, response returns the
value assigned to DEF, MIN, or MAX. Response data type is NR3.
Example :ARB:CURR:RAMP:END:TIME 0.1
:SOUR2:ARB:CURR:RAMP:END:TIME?
[:SOURce]:ARB:<CURRent|VOLTage>:RAMP:RTIMe
Sets the rise time of the current or voltage ramp waveform output. Waveform period
must not exceed 1000 seconds.

Keysight Technologies B2961A Specifications

General

Brand	Keysight Technologies
Model	B2961A
Category	Portable Generator
Language	English