Keysight Technologies B2961A - MEASure Subsystem

Keysight B2961A/B2962A SCPI Command Reference, Edition 6 2- 61
Subsystem Command Summary
Reading Source/Measure Data
Table 2-14 MEASure Subsystem
Command Summary Reset setting
:MEAS? [chanlist]
Executes a spot (one-shot) measurement
for the parameters specified by the
:SENS:FUNC command., and returns the
measurement result data specified by the
:FORM:ELEM:SENS command.
chanlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)
:MEAS:CURR[:DC]? [chanlist]
:MEAS:RES? [chanlist]
:MEAS:VOLT[:DC]? [chanlist]
Executes a spot (one-shot) measurement
and returns the measurement result data.
Measurement items can be specified by
CURR, RES, or VOLT.
chanlist=(@1)|(@2)|(@1,2)|(@1:2)|
(@2,1)|(@2:1)