Keysight Technologies B2961A - :ARM<:ACQuire|:TRANsient|[:ALL]>[:LAYer]:SOUR ce:LAN; :ARM<:ACQuire|:TRANsient|[:ALL]>[:LAYer]:SOUR ce[:SIGNal]

4- 192 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Commands
TRIGger Subsystem
:ARM<:ACQuire|:TRANsient|[:ALL]>[:LAYer]:SOUR
ce:LAN
Specifies one or more LXI triggers used for the arm source for the specified device
action.
Syntax :ARM[c]<:ACQuire|:TRANsient|[:ALL]>[:LAYer]:SOURce:LAN lan_id{,lan_id}
:ARM[c]<:ACQuire|:TRANsient>[:LAYer]:SOURce:LAN?
For <:ACQuire|:TRANsient|[:ALL]> and <:ACQuire|:TRANsient>, specify
:ACQuire for measurement, :TRANsient for source output, or :ALL for both device
actions.
Parameter lan_id LAN ID of the LXI trigger. LAN0|LAN1|LAN2|LAN3|LAN4|
LAN5|LAN6|LAN7. All is selected as default. Parameter data
type is CPD.
Query response response <newline>
response returns the present setting, LAN0 through LAN7. Response data type is
CRD. Multiple responses are separated by a comma.
Example :ARM:SOUR:LAN LAN7
:ARM2:TRAN:SOUR:LAN?
:ARM<:ACQuire|:TRANsient|[:ALL]>[:LAYer]:SOUR
ce[:SIGNal]
Selects the arm source for the specified device action.
Syntax :ARM[c]<:ACQuire|:TRANsient|[:ALL]>[:LAYer]:SOURce[:SIGNal] source
:ARM[c]<:ACQuire|:TRANsient>[:LAYer]:SOURce[:SIGNal]?
For <:ACQuire|:TRANsient|[:ALL]> and <:ACQuire|:TRANsient>, specify
:ACQuire for measurement, :TRANsient for source output, or :ALL for both device
actions.
Parameter source Arm source. AINT (default)|BUS|TIMer|INT1|INT2|LAN|
EXT1|EXT2|EXT3|EXT4|EXT5|EXT6|EXT7|EXT8|EXT9|EX
T10| EXT11|EXT12| EXT13|EXT14. Parameter data type is
CPD.