5- 4 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Error Messages
Command Error
Command Error
If syntax of SCPI command is not valid, a -1XX error occurs.
Error -100 Command error
Generic syntax error that cannot be determined more specifically.
Error -101 Invalid character
An invalid character for the type of a syntax element was received; for example, a
header containing an ampersand.
Error -102 Syntax error
An unrecognized command or data type was received; for example, a string was
received when B2961A/B2962A does not accept strings.
Error -103 Invalid separator
An illegal character was received when a separator was expected; for example, the
semicolon was omitted after a program message unit.
Error -104 Data type error
An improper data type was received; for example, numeric data was expected but
string data was received.
Error -105 GET not allowed
A group execute trigger was received within a program message.
Error -108 Parameter not allowed
Too many parameters for the command were received.
Error -109 Missing parameter
Fewer parameters were received than required for the command.
Error -110 Command header error
An error was detected in the header. This error message is reported if
B2961A/B2962A cannot determine the more specific header errors -111 through
-114.
To Next Page
Loading...
Need help?
General
