Keysight Technologies B2961A Command Reference

Keysight B2961A/B2962A SCPI Command Reference, Edition 6 4- 129
Subsystem Commands
SOURce Subsystem
Example :VOLT 3
:SOUR2:CURR:LEV:IMM:AMPL?
[:SOURce]:<CURRent|VOLTage>[:LEVel]:TRIGgered[
:AMPLitude]
Changes the output level of the specified source channel immediately by receiving a
trigger from the trigger source set by the
:TRIGger<:ACQuire|:TRANsient|[:ALL]>:SOURce[:SIGNal] command.
For the output level after the trigger status is returned to idle, see
“[:SOURce]:FUNCtion:TRIGgered:CONTinuous” on page 4-141.
Syntax [:SOURce[c]]:<CURRent|VOLTage>[:LEVel]:TRIGgered[:AMPLitude] level
[:SOURce[c]]:<CURRent|VOLTage>[:LEVel]:TRIGgered[:AMPLitude]? [level]
For <CURRent|VOLTage>, specify CURRent for current output or VOLTage for
voltage output.
Parameter level Current or voltage output level. value (see “Source Output
Ranges” on page 2-36) |MINimum|MAXimum|DEFault
(default is 0). Parameter data type is NRf+. Query does not
support level=value.
Query response level <newline>
level returns the present setting. If a parameter is specified, level returns the value
assigned to DEF, MIN, or MAX. Response data type is NR3.
Example :VOLT:TRIG 3
:SOUR2:CURR:LEV:TRIG:AMPL?
[:SOURce]:<CURRent|VOLTage>:MODE
Selects the source mode, arbitrary waveform, fixed, sweep, or list sweep, of the
specified source channel.
Syntax [:SOURce[c]]:<CURRent|VOLTage>:MODE mode
[:SOURce[c]]:<CURRent|VOLTage>:MODE?
For <CURRent|VOLTage>, specify CURRent for current output or VOLTage for
voltage output.

Keysight Technologies B2961A Specifications

General

Brand	Keysight Technologies
Model	B2961A
Category	Portable Generator
Language	English