Keysight Technologies B2961A - :LXI:EVENt:DOMain; :LXI:EVENt:INPut:LAN:ADD; :LXI:EVENt:INPut:LAN:COUNt?

4- 28 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Commands
LXI Subsystem
:LXI:EVENt:DOMain
Specifies the LXI LAN domain. <bytDomain> is an integer, 0 to 255. A domain
facilitates multiple systems on a single LAN. LXI modules ignore all LXI messages
except those in its own domain, as defined by the domain byte.
Syntax :LXI:EVENt:DOMain bytDomain
:LXI:EVENt:DOMain?
Parameter bytDomain LXI LAN domain. 0 (default) to 255. Parameter data type is
NRf.
Query response bytDomain <newline>
bytDomain returns the LXI LAN domain. Response data type is NR1.
Example :LXI:EVEN:DOM 1
:LXI:EVEN:DOM?
:LXI:EVENt:INPut:LAN:ADD
B2961A/B2962A ignores this command. Creates a new input event to receive.
Syntax :LXI:EVENt:INPut:LAN:ADD strLanEvent
Parameter strLanEvent LAN event name. String of up to 16 characters enclosed in
quotes. You can use letters (A–Z, a–z), numbers (0–9), and
printable characters like "@", "%", "*", etc. Parameter data type
is SPD.
Example :LXI:EVEN:INP:LAN:ADD “MyEvent”
:LXI:EVENt:INPut:LAN:COUNt?
Returns an integer as the total number of defined input LAN events (includes both
enabled and disabled events).
Syntax :LXI:EVENt:INPut:LAN:COUNt?
Query response count <newline>