Keysight Technologies B2961A - :DISPlay:VIEW; :DISPlay[:WINDow]:DATA?

Keysight B2961A/B2962A SCPI Command Reference, Edition 6 4- 11
Subsystem Commands
DISPlay Subsystem
mode=1 or ON enables the front panel display.
mode=0 or OFF disables the front panel display.
Query response mode <newline>
mode is 0 or 1, and indicates that front panel display is off or on, respectively.
Response data type is NR1.
Example :DISP:ENAB OFF
:DISP:ENAB?
:DISPlay:VIEW
Sets the display mode, single 1, single 2, dual, or graph.
Syntax :DISPlay:VIEW mode
:DISPlay:VIEW?
Parameter mode SINGle1|SINGle2|DUAL|GRAPh. Parameter data type is CPD.
mode=SINGle1 sets the channel 1 display mode. Default setting for 1-channel
models.
mode=SINGle2 sets the channel 2 display mode. Only on 2-channel models.
mode=DUAL sets channel 1, and channel 2 display mode. Only on 2-channel
models. Default setting.
mode=GRAPh sets the graph display mode for the sweep measurement results.
Query response mode <newline>
mode returns SING1, SING2, DUAL, or GRAP. Response data type is CRD.
Example :DISP:VIEW GRAP
:DISP:VIEW?
:DISPlay[:WINDow]:DATA?
Returns the data displayed on the front panel display.
Syntax :DISPlay[:WINDow[d]]:DATA?