Keysight B2961A/B2962A SCPI Command Reference, Edition 6 5- 5
Error Messages
Command Error
Error -111 Header separator error
An illegal character for a header separator was received; for example, no white
space between the header and parameter.
Error -112 Program mnemonic too long
A keyword in the command header contains more than twelve characters.
Error -113 Undefined header
An undefined command header was received; for example, *XYZ.
Error -114 Header suffix out of range
The value of a numeric suffix attached to a program mnemonic is out of range; for
example, :OUTP3:FILT:AUTO specifies illegal channel number 3.
Error -120 Numeric data error
Numeric (including the non-decimal numeric types) data error. This error message is
reported when B2961A/B2962A cannot determine the more specific errors -121
through -128.
Error -121 Invalid character in number
An invalid character for the data type was received; for example, an alpha-character
was received when the type was decimal numeric.
Error -123 Exponent too large
The magnitude of the exponent was larger than 32000.
Error -124 Too many digits
The mantissa of a decimal numeric data contained more than 255 digits excluding
leading zeros.
Error -128 Numeric data not allowed
Numeric data is not allowed in this position for this command.
Error -130 Suffix error
An error was detected in the suffix. This error message is reported if
B2961A/B2962A cannot determine the more specific suffix errors -131 through
-138.
To Next Page
Loading...
Need help?
General
