Keysight Technologies B2961A Command Reference

2- 70 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Command Summary
Using Advanced Functions
:PROG[:SEL]:APP program_code
Adds a program code to the end of a
program stored in the program memory.
program_code: Program code. Up to 256
byte per execution. Sum of all program
size in the program memory must be up to
100 KB.
:PROG[:SEL]:DEF program_code
:PROG[:SEL]:DEF?
Defines a program in the program
memory by entering the initial program
code.
program_code: Program code. Up to 256
byte per execution. Sum of all program
size in the program memory must be up to
100 KB. Maximum of 100 programs can
be memorized.
:PROG[:SEL]:DEL:ALL
Deletes all programs stored in the
program memory.
:PROG[:SEL]:DEL[:SEL]
Deletes a program stored in the program
memory.
:PROG[:SEL]:EXEC
Executes a program stored in the program
memory.
:PROG[:SEL]:NAME name
:PROG[:SEL]:NAME?
Selects the program for performing the
action by the following commands.
If name does not specify the program
stored in the program memory, this
command creates a new program with the
specified name and selects the program.
If name specifies an existing program,
this command selects the program.
Command Summary Reset setting

Keysight Technologies B2961A Specifications

General

Brand	Keysight Technologies
Model	B2961A
Category	Portable Generator
Language	English