2- 64 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Command Summary
Reading Source/Measure Data
:TRAC[c]:FREE?
Returns the available size (available) and
the total size (total) of the trace buffer.
Response is available,total.
:TRAC[c]:POIN points
:TRAC[c]:POIN? [MINimum|MAXimum|
DEFault]
Sets the size of the trace buffer. This
command is effective when the trace
buffer control mode is set to NEV by the
:TRAC[c]:FEED:CONT command.
points=MINimum|MAXimum|DEFault|
1
to 100000
100000
:TRAC[c]:POIN:ACT?
Returns the number of data in the trace
buffer.
:TRAC[c]:STAT:DATA?
Returns the result of the statistical
operation for the data stored in the trace
buffer.
:TRAC[c]:STAT:FORM operation
:TRAC[c]:STAT:FORM?
Selects the statistical operation performed
by the :TRAC[c]:STAT: DATA ?
command.
operation=MINimum|MAXimum|MEAN
|SDEViation|PKPK
MEAN
:TRAC[c]:TST:FORM rule
:TRAC[c]:TST:FORM?
Selects the rule for reading the timestamp
data in the trace buffer.
rule=DELTa|ABSolute
ABS
Command Summary Reset setting
To Next Page
Loading...
Need help?
General
