4- 100 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Commands
SENSe Subsystem
• :SENSe:WAIT:AUTO ON|1 condition:
wait time = gain × initial wait time + offset
• :SENSe:WAIT:AUTO OFF|0 condition:
wait time = offset
The initial wait time is automatically set by the instrument and cannot be changed.
gain and offset are set by the :SENSe:WAIT:GAIN and :SENSe:WAIT:OFFSet
commands, respectively.
Query response mode <newline>
mode is 0 or 1, and indicates that the measurement wait time is disabled or enabled,
respectively. Response data type is NR1.
Example :SENS:WAIT 0
:SENS2:WAIT:STAT?
To Next Page
Loading...
