In This Manual
This manual contains reference information to help you program the Keysight
B2961A/B2962A Low Noise Power Source over the remote interface using the SCPI
programming language. The B2961A/B2962A supports the SCPI programming language
on all of its remote I/O interfaces.
1. “Programming Basics”
Describes a basic information for programming the B2961A/B2962A, and contains a
brief introduction to the SCPI programming language, the data output format, the
status system diagram, and the non-volatile settings.
2. “Subsystem Command Summary”
Lists the B2961A/B2962A SCPI subsystem commands and summary descriptions.
3. “Common Commands”
Provides reference information such as description and command syntax of SCPI
common commands available for the B2961A/B2962A.
4. “Subsystem Commands”
Provides reference information such as description and command syntax of device
specific SCPI commands available for the B2961A/B2962A.
5. “Error Messages”
Lists the B2961A/B2962A error messages, and provides error number, error message
and description.
See User's Guide for information about the B2961A/B2962A itself.
To Next Page
Loading...
