4- 202 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Commands
TRIGger Subsystem
For <:ACQuire|:TRANsient|[:ALL]> and <:ACQuire|:TRANsient>, specify
:ACQuire for measurement, :TRANsient for source output, or :ALL for both device
actions.
Parameter mode Trigger output ON or OFF. 1|ON|0|OFF (default). Parameter
data type is boolean.
mode=1 or ON enables the trigger output.
mode=0 or OFF disables the trigger output.
Query response response <newline>
response returns 1 or 0, and indicates that the trigger output is on or off, respectively.
Response data type is NR1.
Example :TRIG:TOUT 1
:TRIG2:TRAN:TOUT:STAT?
To Next Page
Loading...
