Keysight B2961A/B2962A SCPI Command Reference, Edition 6 5- 19
Error Messages
B2961A/B2962A Specific Error
This program is running. Execute the program after it is stopped.
Error 707 ProgramMemory; Cannot step program while program is
running
Program is running. Step execution is effective when program is paused or stopped.
Error 708 ProgramMemory; Cannot continue program while program is
running
Program is running. Program continue is effective when program is paused.
Error 709 ProgramMemory; Cannot continue program while program is
stopped
Program is stopped. Program continue is effective when program is paused.
Error 710 ProgramMemory; Program line is too long
Program memory cannot save the program. Reduce program line.
Error 711 ProgramMemory; Variable length is too long
Variable contains too many data. Reduce variable length.
Error 712 ProgramMemory; Unsupported command is used in program
Memory program cannot contain the specified command.
Error 713 ProgramMemory; Cannot set multiple INIT commands in
program line
A program line cannot contain multiple INIT commands.
Error 714 ProgramMemory; Invalid character in program line
Program line contains invalid character. Use appropriate characters.
Error 715 ProgramMemory; Invalid character in program name
Appropriate program name must be specified.
Error 716 ProgramMemory; Program count overflow
Program memory cannot save the program. Delete dispensable program.
Error 801 Calculate; Expression list full
To Next Page
Loading...
Need help?
General
