Keysight B2961A/B2962A SCPI Command Reference, Edition 6 2- 49
Subsystem Command Summary
Controlling Source/Measure Trigger
• Measuring2
• Settling1
• Settling2
All events can be configured by the signal level (or edge), destination, and other
parameters defined in IVI 3.15.
Figure 2-12 Trigger State Machine Signal Relationships
• Limitations
LXI trigger event functions provided by B2961A/B2962A are a subset of the
IEEE-1588 required by LXI Class-B. The following limitations exist for
B2961A/B2962A.
• Timestamp in the event are ignored. (immediate trigger only)
• Delay and other timing parameters cannot be set. (always 0)
• It is not allowed to add/delete any events.
• The :ARM:LXI:COUNt command is not effective. (ignored)
WaitingForAcquireArm[n]
WaitingForTransitionArm[n]
WaitingForAcquireTrigger[n]
WaitingForTransitionTrigger[n]
Measuring[n]
Settling[n]
May be repeated
May be repeated
High
Low
High
Low
High
Low
To Next Page
Loading...
