Keysight Technologies B2961A Command Reference

Keysight B2961A/B2962A SCPI Command Reference, Edition 6 2- 51
Subsystem Command Summary
Controlling Source/Measure Trigger
:LXI:EVEN:INP:LAN:COUN?
Returns an integer as the total number of
defined input LAN events (includes both
enabled and disabled events).
8
:LXI:EVEN:INP:LAN:DIS:ALL
Disables all input events.
:LXI:EVEN:INP:LAN:LIST?
Returns a quoted string with the list of
defined input event names.
:LXI:EVEN:INP:LAN:REM:ALL
This command is ignored.
:LXI:EVEN:INP:LAN:REM event
This command is ignored.
:LXI:EVEN:INP:LAN[:SET]:CONF eve
nt,status,detect[,delay],filter,
id
Configures the most common attributes
of LXI LAN input events.
event: LAN event name
status: Status
detect: Detection type
delay: Delay time
filter: Filter
id: Identifier
:LXI:EVEN:INP:LAN[:SET]:DEL even
t,delay
:LXI:EVEN:INP:LAN[:SET]:DEL? eve
nt
Delay time must be zero.
event: LAN event name
delay: Delay time, in seconds
0
:LXI:EVEN:INP:LAN[:SET]:DET even
t,detect
:LXI:EVEN:INP:LAN[:SET]:DET? eve
nt
Specifies the trigger detection method
and polarity for the input event.
event: LAN event name
detect=RISE|FALL|HIGH|LOW
RISE
:LXI:EVEN:INP:LAN[:SET]:ENAB eve
nt,status
:LXI:EVEN:INP:LAN[:SET]:ENAB? ev
ent
Enables or disables the specified input
event.
event: LAN event name
status=0|OFF|1|ON
OFF
Command Summary Reset setting

Keysight Technologies B2961A Specifications

General

Brand	Keysight Technologies
Model	B2961A
Category	Portable Generator
Language	English