Leica Captivate - Exporting Data in FBK;RW5;RAW Format

Field Option Description
Password Editable field Available when Use pro
tected stylesheets
is checked.
The password allows the use of *.lss protec-
ted stylesheets. The password can have 16
characters at maximum.
If the password is correct and OK is pressed,
then the export will be carried out
If the password is incorrect and OK is
pressed, then the export cannot be carried
out.
An error message is displayed in case of a
wrong password or a problem derived from
the export.
Stylesheet
to use
Selectable list The style sheets currently available in the
\CONVERT folder on the internal memory.
Description Display only A detailed description of the style sheet.
When Use protected stylesheets is not
checked, then this information is entered by
the user in a variable within the style sheet.
When Use protected stylesheets is
checked and the correct password was typed
in, then this information read and displayed
from the style sheet.
To device Selectable list Defines where the exported data is saved to.
To folder Selectable list The data can be exported to the \DATA direc-
tory or to the folder where the selected job
is located.
Output file Editable field The name of the file to which the data is
exported. The file extension is defined by the
user in a variable inside the style sheet.
Default is "txt" if the extension has not been
defined.
11.7 Exporting Data in FBK/RW5/RAW Format
Data can be exported to file with the format of:
•
Au
t
oDesk FBK
•
TDS RAW
•
TDS RW5
•
Carlson RW5
•
MicroSurvey RW5
•
Bentley’s software solutions
The newly created file is stored in the \DATA directory of the data storage
devic
e or to the folder where the export job is located.
The formatted FBK files can be imported directly into Autodesk products.
The created RW5, RAW and RWD files can be processed with various survey
office packages.
General
Job Menu - Export data 143