Leica Captivate - Accessing Measure to Line;Stake to Line

TS_023
P1
P2
P3
P3
P4
+
+
-
-
P0
For TS:
P0 Instrument setup
P1
S
tart point
P2 End point
P3 Measured point
P4 Reference point
A line can be shifted. A shift is permanently applied to the line during of the
Measur
e to line/Stake to line task.
000237_002
d2
d1
P0
P0b
P0a
P1a
P1
P1b
For GS:
P0 Start point
P1
End p
oint
P0a Start point with Vertical
shift
P1a End point with Vertical
shift
P0b Start point with Horizontal
shift
P1b End point with Horizontal
shift
d1 Vertical shift
d2 Horizontal
000407_002
d2
d1
P1
P1b
P1a
P2a
P2
P2b
P0
ForTS:
P0 Instrument setup
P1 S
tart point
P2 End point
P1a Start point with Vertical
shift
P2a End point with Vertical
shift
P1b Start point with Horizontal
shift
P2b End point with Horizontal
shift
d1 Vertical
d2 Horizontal
41.2 Accessing Measure to line/Stake to line
•
F
o
r measuring tasks:
Select Leica Cap
tivate - Home: Measure to line.
•
Fo
r staking tasks:
Select Leica Cap
tivate - Home: Stake to line.
Shifts
Access
Measure to line/Stake to line 565