Leica Captivate - Bubble Icons; Icon Pop-Up Bubble: Measure & Target

Icon Description
Search & lock Searches for a prism to lock on.
Wait & lock Locks to a prism as soon as it enters the field of
view of au
tomatic aiming. When previously locked to
a prism and target lock was lost. Works on all prisms
and tape targets.
☞
A PowerSearch helps to lock to shaking
prisms.
Target lock off Stops the lock.
Target lock on Sets Aim at target: With lock.
Target lock off Sets Aim at target to the previous non-lock setting.
Filter learn Starts a PowerSearch scan by doing three times a
360° scan with different vertical positions of the
telescope.
The PowerSearch scan finds prisms and other reflec-
tive spots in the surrounding of the instrument.
Around each found prism or reflective spot, an exclu-
sion area is defined. The exclusion area has the
dimension of Hz = ± 1 gon, V = ± 50 gon and
d = ± 12 m is defined.
Filter on Available when Filter learn was used before. Turns
on the PowerSearch filter and excludes the learned
prisms from a PowerSearch.
Filter off Available when Filter learn was used before. Turns
off the PowerSearch filter and includes all prisms in a
PowerSearch.
PowerSearch Prisms are searched for with PowerSearch in the
PowerSearch window when this icon is used.
☞
If this icon is selected and Meas any sur-
face is still set, then this setting is
changed to Measure prism.
5.3 Icon Pop-Up Bubble: Measure & Target
Icon Description
Meas any surface To measure to any surface (reflectorless). Automati-
cally s
ets Aim at target: Manually.
Measure prism To measure to prisms.
Meas continuous To set the distance measurements to continuous.
Meas single shot To set the distance measurements to the previous
non-continuous mode.
Targets To select a prism.
Red laser on To turn the red laser of the reflectorless EDM on.
Red laser off To turn the red laser of the reflectorless EDM off.
Bubble icons
30 Icon Pop-up Bubbles