Key Description
OK To continue to the next panel.
Fn Settings T
o configure the app. Refer to "60.3 Configuring Inspect sur-
faces".
Fn Display To configure what is displayed in 3D viewer.
Fn Layers To turn CAD layers on or off.
Fn Filter To define sort and filter settings. Refer to "7.6 Point Sorting
and Filters".
Fn Page To change to another page on this panel.
Next step
OK to ac
cess Define Object to Compare.
60.4.3 From a Pre-Defined Plane or Solid
Select From a pre-defined plane or solid in Define Reference Surface.
Selec
t from:
•
Hori
zontal plane
Choose or measure a point to define the height of the horizontal plane.
•
Vertical plane
Choose or measure two points to define the vertical plane.
•
Plane defined by three points
Choose or measure three points to define the plane.
•
Cylinder
Choose or measure two points to define the axis of the cylinder and enter
the radius of the cylinder.
•
Cone
Choose or measure two points to define the axis of the cone, and enter
the radius for the two bases.
Key Description
OK To continue to the next panel.
Meas app To measure a point manually for the plane definition. Availa-
ble when Poin
t, 1st point, 2nd point or 3rd point is high-
lighted.
Fn Settings To configure the app. Refer to "60.3 Configuring Inspect sur-
faces".
Description of fields
Field Option Description
Point Selectable list The point ID of the point defining the height
o
f a ho
rizontal plane.
Available for Horizontal plane (defined by
one point).
Access
Define plane or cylin-
der
984 Inspect Surfaces
To Next Page