Introduction
Congratulations on the purchase of the Leica Captivate software.
The symbols used in this manual have the following meanings:
Type Description
☞
Important paragraphs which must be adhered to in practice
as they enable the pr
oduct to be used in a technically correct
and efficient manner.
To use the product in a permitted manner, please refer to the detailed safety
direc
tions in the available User Manuals.
The CS35 is a Windows based tablet with a Leica Image installed and Leica
Captivate field software running. Changing settings in the image respectively in
the operating system of the CS35, other than changes recommended by Leica
Geosystems, is the responsibility of the user.
The proper operation of Leica Captivate cannot be guaranteed anymore after
such changes.
Any support by Leica Geosystems after such changes is limited and lies rather
in the re
sponsibility of the user or the user’s IT department.
Changes allowed Changes that might cause issues
•
Installing s
oftware
•
Loading another, non Leica image
•
Installing non Leica provided drivers
•
Loading software which is also using the
CLM license management but working on a
different version
☞
Bringing the CS35 into an IT infrastructure might change network set-
tings aut
omatically and can result in issues of the Leica network set-
tings.
•
Windows is a reg
istered trademark of Microsoft Corporation in the United
States and other countries
•
Bluetooth
®
is a registered trademark of Bluetooth SIG, Inc.
•
SD Logo is a trademark of SD-3C, LLC.
All other trademarks are the property of their respective owners.
•
This manual ap
plies to the Leica Captivate software.
•
This manual covers all instruments using Leica Captivate software.
Video tutorials are available on:
ht
tp://www.leica-geosystems.com/captivate-howto
Purchase
Symbols
☞
Trademarks
Validity of this man-
ual
2
To Next Page
Loading...
