Field Option Description
Radius Editable field The radius of the arc.
Start point Selectable list The first point forming the line.
Second
poin
t
Selectable list The medium point forming the arc.
End point Selectable list The last point forming the line.
Point ID Editable field The end point of the defined line. Available
for creating a line with Method:Point, brng,
dist, height diff or Point, brng, dist,
grade.
Description of fields
Field Option Description
Method Select one of the following options to create
a line/arc/p
olyline.
2 points and
Line from 2
points
For lines/polylines. Uses two known points
to define the line.
Point, brng,
dist, grade
and
Line from
point, bear-
ing, dis-
tance &
grade
For lines/polylines. Defines the line using a
known point, a distance, an azimuth and the
gradient of the line. A new point is created
at the end of the line.
Point, brng,
dist, height
diff and
Line from
point, bear-
ing, dis-
tance &
height dif-
ference
For lines/polylines. The same as Point, brng,
dist, grade/Line from point, bearing, dis-
tance & grade but uses the difference in
height instead of the gradient. A new point
is created at the end of the line.
3 points and
Arc from 3
points
For arcs/polylines. Defines the arc using
three known points.
2 points &
radius and
Arc from 2
pts & a
radius
For arcs/polylines. Defines the arc with two
known points and a known radius.
For all point fields, the 3D viewer can be used to select the desired point.
Key Description
Store To store the line/arc to the design job.
Next To store the line/arc and to remain in the panel. The line ID
incremen
ts according to line ID template.
Methods for creating
lines, ar
cs and poly-
lines
Create new line/arc
Creating Points and Lines 149
To Next Page