Leica Captivate - Page 779

Field Option Description
Offset Editable field The horizontal offset of the hinge point from
the cen
treline/reference line.
Height off-
set type
The vertical offset type for the hinge point.
Absolute The only option available for 2D lines.
Relative to
line or
Hold hinge
Available for 3D lines.
Relative to
surface
grade
Available for Stake: Manual slope. The
manual slope is defined by:
•
Hinge of
fset relative to the selected
hinge reference line
•
Hinge height, calculated by using the
hinge offset on the selected surface
grade (left or right selected surface
grade, depending on Offset – or +)
b
a
c
d
Road_105
a Hinge point of manual slope
b De
fined hinge offset (-)
c Left surface grade of design
d Selected hinge reference
Height Editable field The elevation of the hinge point (absolute
height). Available for Height offset
type: Absolute.
Slope loca-
tion
Selectable list Differentiates if the defined slope is a cut/fill
and left/right.
a
bc
de
Road_079
a Hinge point
b Le
ft cut
c Right cut
d Left fill
e Right fill
Roads - Road 779