This panel is displayed automatically at the end of the sets measurement.
Key Description
OK To continue with the next panel.
Description of metadata
Metadata Description
- Points of the point group in the same order as in the point
group.
Compl m
eas How many times the point was successfully measured.
Example: 4/6 - The point was measured four times, six sets
were measured.
In tolerance How many times the tolerance configured was met.
Example: 4/6 - The point falls within the defined tolerance
four times, six sets were measured.
Compl sets How many sets are completed. The value is the same for all
points.
Example: 4/6 - The point was measured in a complete set
four times, six sets were measured.
Depending on points skipped or not, select how to continue.
Key Description
OK To select the highlighted option and to continue with the
next panel.
Description of options
Options Description
Always available:
Measure
mo
r
e sets
To measure extra sets.
Available for sets incomplete:
Re-measure
incomplete
sets
To remeasure the skipped points in the face that was skip-
ped. To fill in the missing measurements in the sets.
Remove
incomplete
points
To calculate results. The skipped points are discarded. Only
points measured in all sets are used for the calculation.
Remove
incomplete
sets
To calculate results. The sets that contain skipped points are
discarded. Only the complete sets are used for the calcula-
tion.
Available for sets complete:
View &
manage
results
Available when no points are skipped. Refer to "49.2.6 Man-
aging Results".
Compute
points from
results
Available when no points are skipped. To compute points
from set results.
Measurement Sum-
mary
Af
ter measuring sets
862 Sets of Angles - TS
To Next Page