2-22 Printer Service Manual
5057-XXX
Remove paper
from bin 1
Finisher upper media bin full. Stacker set over count
The upper media bin has reached maximum
capacity.
Refer to the Finisher Service Manual.
Remove paper
from bin 2
Stacker media bin full (no
mix)
The stacker media bin has reached maximum
capacity (no mix).
Refer to the Finisher Service Manual.
Remove paper
from bin 2
Stacker media bin full (mix
size)
The stacker media bin has reached maximum
capacity (mix size).
Refer to the Finisher Service Manual.
Remove paper
from standard
output bin
Standard bin 1 full. Media in standard bin 1 is at maximum capacity.
Go to “Standard media bin full” on page 2-137.
Toner
unsupported
Toner cartridge RFID error A toner cartridge of a different specification is
installed.
Go to “Toner cartridge set error” on page 2-138.
Error code or
message
Error contents Description/Action