Lexmark C935 - Table of Contents

3-4 Printer Service Manual
5057-XXX
Go Back
Previous
Next
Panel Test
See “Panel Test” on page 3-7.
Button Test See “Button Test” on page 3-7.
DRAM Test
See “DRAM Test” on page 3-8.
CACHE Test See “CACHE Test” on page 3-8.
DUPLEX TESTS
Quick Test See “Quick Test” on page 3-8.
Sensor Test See “Sensor Test (duplex)” on page 3-9.
INPUT TRAY TESTS
Feed Tests See “Feed Tests” on page 3-9.
Sensor Test See “Sensor Test (input tray)” on page 3-10.
OUTPUT BIN TESTS
Feed to All Bins See “Feed Tests (output bins)” on page 3-10.
Feed Tests See “Feed To All Bins” on page 3-11.
Sensor Tests See “Sensor Test (output bin)” on page 3-11.
FINISHER TESTS
Staple Test See “Staple Test” on page 3-11.
Hole Punch Test See “Hole Punch Test” on page 3-12.
Feed Tests See “Feed Tests (Finisher)” on page 3-12.
Sensor Tests See “Sensor Test (Finisher)” on page 3-12.
BASE SENSOR TESTS See “BASE SENSOR TEST” on page 3-14.
Cover and Door
Devices
Exit Level
Media Path
Transfer Belt
PRINTER SETUP
Defaults See “Defaults” on page 3-16.
PAGE COUNTS See “Prt Color Pg Count” on page 3-16.
Serial Number See “Serial Number” on page 3-16.
Engine Setting 1 to 4 See “Engine Setting 1 to 4” on page 3-16.
Model Name See “Model Name” on page 3-16.
Configuration ID See “Configuration ID” on page 3-16.
EVENT LOG
Display Log See “Display the Event Log” on page 3-17.
Print Log See “Print the Event Log” on page 3-18.
Clear Log See “Clear the Event Log” on page 3-18.
Trans Belt Fail Clear
Trans Belt HP Fail Clear See “Trans Belt HP Fail Clear” on page 3-18.
Fuser Temp Fail Clear
Fuser Temp Fail Clear See “Fuser Temp Fail Clear” on page 3-19.
ATC SENSOR FAILURE CLEAR See “ATC SENSOR FAILURE CLEAR” on page 3-19.
Y Channel (925.00)
M Channel (925.01)