Lexmark C935 - Sheet Dual Input (TTM) Switch (Media Size) Removal

Repair information 4-139
5057-XXX
Go Back
Previous
Next
2000-sheet dual input (TTM) switch (media size) removal
Note: This procedure can be applied to tray 1 or tray 2 switch (media size).
1. Remove media Tray 1 and media Tray 2.
2. Remove one screw securing the switch (media size) (A) to the bracket inside the machine.
3. Remove the connector from switch (media size) (A).
4. Remove the switch (media size) (A).
A
Connector
Front