Lexmark C935 - Fuser Temp Fail Clear; Atc Sensor Failure Clear; Y Channel (925.00); M Channel (925.01)

Diagnostic aids 3-19
5057-XXX
Go Back
Previous
Next
Dev Unit Reset
To perform the Dev Unit Reset Test:
1. Select Dev Unit Reset from the Diagnostics Menu.
The following tests appear on the LCD:
When each test completes, the LCD returns to Dev Unit Reset.
Fuser Temp Fail Clear
To perform the Fuser Temp Fail Clear Test:
1. Select Fuser Temp Fail Clear from the Diagnostics Menu.
2. Select Fuser Temp Fail Clear.
Fuser Temp Fail Clear Testing.... appears on the LCD.
When testing is complete, the LCD returns to Fuser Temp Fail Clear.
ATC SENSOR FAILURE CLEAR
To perform the ATC Sensor Failure Clear Test:
1. Select ATC SENSOR FAILURE CLEAR from the Diagnostics Menu.
The following tests appear on the LCD:
When each test completes, the LCD returns to ATC SENSOR FAILURE CLEAR.
Select the following: Appears on the LCD:
Y Channel Y Channel Testing...
M Channel M Channel Testing...
M Channel C Channel Testing...
K Channel K Channel Testing...
Select the following: Appears on the LCD:
Y Channel (925.00) Y Channel Testing...
M Channel (925.01) M Channel Testing...
M Channel (925.02) C Channel Testing...
K Channel (925.02) K Channel Testing...