Lexmark C935 - Transfer Belt Drive Motor Assembly Removal

4-94 Printer Service Manual
5057-XXX
Go Back
Previous
Next
7. Remove the transfer belt drive motor cooling fan (A).
Transfer belt drive motor assembly removal
1. Remove the rear cover assembly. See “Rear cover assembly removal” on page 4-5.
2. Remove the rear upper cooling fan bracket assembly. See “Rear upper cooling fan bracket assembly removal”
on page 4-111.
3. Remove the developer / transfer roll HVPS card assembly. See “Developer / transfer roll HVPS card assembly
removal” on page 4-112.
4. Remove the transfer belt drive motor cooling fan. See “Transfer belt drive motor cooling fan removal” on
page 4-93.
5. Disconnect the connector from the transfer belt drive motor assembly (A).
6. Remove the transfer belt drive motor assembly (A).
A
Con