Lexmark C935 - X 500-Sheet Drawer (3 Tm)-Media Feed Lift Motor Removal

Repair information 4-175
5057-XXX
Go Back
Previous
Next
7. Remove the sensor (tray 3 feed-out) (B).
3X 500-sheet drawer (3TM)—media feed lift motor removal
1. Remove the media feed unit assembly. See“3X 500-sheet drawer (3TM)—media feed unit assembly
removal (tray 2)” on page 4-173, “3X 500-sheet drawer (3TM)—media feed unit assembly removal (tray
3)” on page 4-171, or “3X 500-sheet drawer (3TM)—media out actuator removal” on page 4-177.
2. Disconnect the harness from the media feed lift motor (A).
3. Remove the two screws securing the media feed lift motor to the media feed unit assembly (B).
4. Remove the media feed lift motor (B).
A
B
Connector
Rear