Lexmark C935 - V LVPS Card Assembly Removal

4-98 Printer Service Manual
5057-XXX
Go Back
Previous
Next
6. Remove the four screws securing the 5V LVPS card bracket assembly (A) to the machine.
7. Remove the 5V LVPS card bracket assembly (A).
5V LVPS card assembly removal
1. Remove the rear upper cooling fan bracket assembly. See “Rear upper cooling fan bracket assembly removal”
on page 4-111.
2. Remove the developer / transfer roll HVPS card assembly. See “Developer / transfer roll HVPS card assembly
removal” on page 4-112.
3. Remove the lower printer engine card bracket assembly. See “Lower printer engine card bracket assembly
removal” on page 4-92.
4. Remove the 5V HVPS card bracket assembly. See “5V LVPS card bracket assembly removal” on page 4-97.
5. Remove the four screws securing appropriate 5V LVPS card assembly (A) to the 5V HVPS card bracket assembly.
6. Remove the appropriate 5V LVPS card assembly (A).