3-6 Printer Service Manual
5057-XXX
3. During the test, Motor Running... appears on the LCD.
Note: If available, Forward and Reverse options appear on the LCD for selected tests.
Press Stop to stop the test.
PRINT TESTS
To run the Print Tests:
1. Select PRINT TESTS from the Diagnostics Menu.
2. Select [Input Source] to verify that the printer can generate output from that source’s media.
3. Select Printing Quality Test Pages to view information about the printer’s current settings and to test the
printer’s ability to generate quality output.
4. Select Single or Continuous.
• If Single is selected, a single page is printed.
• If Continuous is selected, printing continues until Stop is pressed to cancel the test.
If a source is selected that contains envelopes, an envelope test pattern is printed. If Continuous is
selected, the test pattern is printed only on the first envelope.
After a Single test has printed or a Continuous test canceled, the LCD returns to the [Input Source] screen.
The following Printer Motor Tests are available:
• Transfer belt steering motor • Y toner add motor
• CMY PC cartridge drive motor • K toner add motor
• K PC cartridge drive motor • CMY developer drive motor
• Printhead polygon mirror motor • K developer clutch
• Tray 1 media feed/lift motor • Fuser cooling fan
• Registration clutch • Image density sensor shutter solenoid
• 2nd transport roll retract motor • Rear upper/rear lower cooling fans
• K developer transport drive motor • K erase lamps
• MPF pick solenoid • CMY erase lamps
• MPF transport drive motor • Tray module drive motor
• Duplex drive motor • TTM tray 4 media transport motor
• Inverter clutch • Tray 2 media feed/lift motor
• Duplex diverter gate solenoid • Tray 3 media feed/lift motor
• CMY transfer roll retract motor • Tray 4 feed/lift motor
• Transfer belt drive motor • 3TM drive motor
• C toner add motor • Waste toner auger motor
• M toner add motor • Printhead shutter motor
• • Standard exit shift motor
Input source Appears on the LCD
Tray 1 Tray 1 Printing...
Tray 2 Tray 2 Printing...
Tray 3
Tray 3 Printing...
Tray 4 Tray 4 Printing...
MP Feeder
MP Feeder Printing...
Printing Quality Test Pages Printing Quality Test Pages...
To Next Page
Loading...
