Lexmark C935 - Sheet Dual Input (Ttm)-Switch (TTM Media Size) Removal

4-140 Printer Service Manual
5057-XXX
Go Back
Previous
Next
2000-sheet dual input (TTM)—switch (TTM media size) removal
Note: This removal procedure may be applied to media tray 3 and media tray 4.
1. Remove the tray module left cover. See “2000-sheet dual input (TTM)— tray module left cover removal” on
page 4-123.
2. Remove the media tray 3 assembly See (“2000-sheet dual input (TTM)—TTM media tray 3 assembly removal”
on page 4-128) or media tray 4 assembly (“2000-sheet dual input (TTM)—TTM media tray 4 assembly
removal” on page 4-127).
3. Disconnect the connector from the switch (TTM media size) (A).
4. Remove one screw securing the switch (TTM media size) (A).
5. Remove the switch (TTM media size) (A).
Rear
Connector
A