Lexmark C935 - Tray Low Message

Diagnostic aids 3-29
5057-XXX
Go Back
Previous
Next
To change this setting:
1. Select Short Edge Printing from the Configuration Menu.
2. Select Back to cancel and return to the Configuration Menu.
3. Press to save the change.
Tray Low Message
This setting allows you to disable any Tray Low warnings that the printer may register.
Selecting Disabled turns off the tray low prompts. The default is Enabled.
To change this setting:
1. Select Require Standby from the Configuration Menu.
2. Select Back to cancel and return to the Configuration Menu.
3. Press to save the change.
Exiting Configuration Menu
Press or until Exit Config Menu appears on the LCD. Select Exit Config Menu.