Lexmark C935 - Standard Media Exit bin Full Actuator Removal

4-18 Printer Service Manual
5057-XXX
Go Back
Previous
Next
Standard media exit bin full actuator removal
1. Remove the rear cover assembly. See “Rear cover assembly removal” on page 4-5.
Warning: Ensure that the rear left middle cover is removed before removing the rear left upper cover, or damage
will occur.
2. Remove the rear left middle cover. See “Rear left middle cover removal” on page 4-6.
3. Remove the rear left upper cover. See “Rear left upper cover removal” on page 4-7.
4. Remove the screw securing the standard exit top cover (A) to the machine.
5. Gently lift the standard exit top cover (A) from the machine.
6. Remove the standard exit top cover (A) from the machine.
7. Remove the screw securing the bracket (B) to the machine.
8. Remove the bracket (B).
9. Gently flex the standard media exit bin full actuator (C) to detach it from the machine.
10. Remove the standard media exit bin full actuator (C) from the machine.
Connectors
A