Lexmark C935 - Error Code Table

Diagnostic information 2-3
5057-XXX
Go Back
Previous
Next
Error code table
Error code or
message
Error contents Description/Action
200.00
Paper jam
Sensor (registration) late jam The media is late reaching the sensor (registration)
within the specified time after being fed from any
given media tray.
Go to “200.00 Sensor (registration) late jam” on
page 2-23.
200.01
Paper jam
Sensor (registration) lag jam The media reached the sensor (registration) but did
not clear it within the specified time.
Go to “200.01 Sensor (registration) lag jam” on
page 2-24.
200.02
Paper jam
Sensor static jam Media remains in the areas shown on the operator
panel after power on.
Go to “200.02 Sensor static jam” on page 2-26.
200.03
Paper jam
Sensor (media on belt) late
jam
The media is late reaching the sensor (media on
belt) within the specified time after reaching the
sensor (registration).
Go to “200.03 Sensor (media on belt) late jam”
on page 2-27.
201.00
Paper jam
Sensor (fuser exit) late jam The media is late reaching the sensor (fuser exit)
within the specified time after reaching the sensor
(registration).
Go to “201.00 Sensor (fuser exit) late jam” on
page 2-28.
202.00
Paper jam
Sensor (fuser exit) lag jam The media reached the sensor (fuser exit) but did
not clear it within the specified time.
Go to “202.00 Sensor (fuser exit) lag jam” on
page 2-30.
230.00
Paper jam
Sensor (duplex wait) late jam
(duplex media feed)
The media is late reaching the sensor (duplex wait)
within the specified time after the duplex media
inverter clutch is turned on.
Go to “230.00 Sensor (duplex wait) late jam
(duplex media feed)” on page 2-31.
231.00
Paper jam
Sensor (registration) late jam
(duplex media feed)
The media is late reaching the sensor (registration)
within the specified time after the duplex drive motor
is turned on.
Go to “231.01 Sensor (registration) late jam
(duplex media feed)” on page 2-35.
231.01
Paper jam
Sensor (registration) late jam
(duplex media feed)
The media is late reaching the sensor (registration)
within the specified time after reaching the sensor
(duplex wait).
Go to “231.01 Sensor (registration) late jam
(duplex media feed)” on page 2-35.
241.00
Paper Jam
Sensor (tray 1 feed-out) late
jam.
The media is late reaching the sensor (tray 1 feed-
out) within the specified time after the tray 1 media
feed lift motor is turned on.
Go to “241.00 Sensor (tray 1 feed-out) late jam”
on page 2-37.