Lexmark C935 - Page 96

2-4 Printer Service Manual
5057-XXX
Go Back
Previous
Next
242.00
Paper jam
Sensor (tray 2 feed-out) late
jam.
The media is late reaching the sensor (tray 2 feed-
out) within the specified time after the tray 2 media
feed lift motor is turned on.
Go to “242.00 Sensor (tray 2 feed-out) late jam”
on page 2-39.
242.01
Paper jam
Sensor (tray 1 feed-out) late
jam (feeding from tray 2)
The media is late reaching the sensor (tray 1 feed-
out) within the specified time after reaching the
sensor (tray 2 feed-out).
Go to “242.01 Sensor (tray 1 feed-out) late jam
(feeding from tray 2)” on page 2-40.
243.00
Paper jam
Sensor (tray 3 feed-out) late
jam.
The media is late reaching the sensor (tray 3 feed-
out) within the specified time after the tray 3 media
feed lift motor is turned on.
TTM equipped machines go to “243.00 Sensor
(tray 3 feed-out) late jam” on page 2-41.
3TM equipped machines refer to the Options
Service Manual.
243.01
Paper jam
Sensor (tray 2 feed-out) late
jam (feeding from tray 3)
The media is late reaching the sensor (tray 2 feed-
out) within the specified time after reaching the
sensor (tray 3 feed-out).
TTM equipped machines go to “243.01 Sensor
(tray 2 feed-out) late jam (feeding from tray 3)”
on page 2-43.
3TM equipped machines refer to Options Service
Manual.
244.00
Paper jam
Sensor (tray 4 feed-out) late
jam.
The media is late reaching the sensor (tray 4 feed-
out) within the specified time after the tray 4 media
feed lift motor is turned on.
TTM equipped machines go to “244.00 Sensor
(tray 4 feed-out) late jam” on page 2-45.
3TM equipped machines refer to Options Service
Manual.
244.01
Paper jam
Sensor (tray 3 feed-out) late
jam (feeding from tray 4)
The media is late reaching the sensor (tray 3 feed-
out) within the specified time after reaching the
sensor (tray 4 feed-out).
TTM equipped machines go to “244.01 Sensor
(tray 3 feed-out) on jam (feeding from tray 4)” on
page 2-47.
3TM equipped machines refer to the Options
Service Manual.
250.00
Paper jam
Sensor (registration) late jam
(feeding from the MPF)
The media is late reaching the sensor (registration)
within the specified time after the MPF pick solenoid
is turned on.
Go to “250.00 Sensor (registration) late jam
(feeding from the MPF)” on page 2-49.
280.00
Paper jam
Sensor (bridge unit media
entrance) late jam
The media is late reaching the sensor (bridge unit
media entrance) within the specified time after
reaching the sensor (fuser exit).
Refer to the Finisher Service Manual.
280.01
Paper jam
Sensor (bridge unit media
entrance) static jam
Media remains on the sensor (bridge unit media
entrance).
Refer to the Finisher Service Manual.
Error code or
message
Error contents Description/Action