Lexmark C935 - Waste Toner Cartridge Cover Removal

Repair information 4-39
5057-XXX
Go Back
Previous
Next
Waste toner cartridge cover removal
1. Remove the printer front door assembly. See “Printer front door assembly removal” on page 4-3.
2. Lower the waste toner cartridge cover (A) to its lower-most position.
3. Remove the waste toner cartridge.
4. Remove the front left cover. See “Front left cover removal” on page 4-9.
5. Remove the C-clip securing the waste toner cartridge cover (A) to the machine.
6. Move the waste toner cartridge cover (A) to the left.
7. Remove the waste toner cartridge cover (A).
Waste toner cartridge sensor assembly removal
1. Remove the printer front door assembly. See “Printer front door assembly removal” on page 4-3.
2. Remove the front left cover. See “Front left cover removal” on page 4-9.
3. Remove the waste toner cartridge cover. See “Waste toner cartridge cover removal” on page 4-39.
4. Remove the screw securing the bracket (A) to the machine.
5. Remove the bracket (A).
6. Disconnect the three connectors from the waste toner cartridge sensor assembly (B).
7. Remove the harness from the clamps.
8. Remove the waste toner cartridge sensor assembly (B).
A
C-clip
A
B