Lexmark C935 - Printhead Polygon Mirror Motor Error

2-96 Printer Service Manual
5057-XXX
Go Back
Previous
Next
907.00 Printhead polygon mirror motor error
907.01 Y laser SOS internal error
907.02 C laser SOS internal error
Step Check Yes No
1 Perform a POR.
Does the error occur when the power is turned off/on?
Go to step 2. Perform several
print tests.
If the problem
remains, go to
step 2.
2
Turn the printer off for 60 seconds.
Does the error occur when the power is turned off/on again?
Go to step 3. Problem solved.
3
Perform a POR.
Does the error occur when the power is turned off/on?
Replace the
printhead
assembly.
Go to “Printhead
assembly
removal” on
page 4-104.
Problem solved.
Step Check Yes No
1 Perform a POR.
Does the error occur when the power is turned off/on?
Go to step 2. Perform several
print tests.
If the problem
remains, go to
step 2.
2
Turn the printer off for 60 seconds.
Does the error occur when the power is turned off/on again?
Go to step 3. Problem solved.
3
Perform a POR.
Does the error occur when the power is turned off/on?
Replace the
printhead
assembly.
Go to “Printhead
assembly
removal” on
page 4-104.
Problem solved.
Step Check Yes No
1 Perform a POR.
Does the error occur when the power is turned off/on?
Go to step 2. Perform several
print tests.
If the problem
remains, go to
step 2.
2
Turn the printer off for 60 seconds.
Does the error occur when the power is turned off/on again?
Go to step 3. Problem solved.