Lexmark C935 - Page 177

Diagnostic information 2-85
5057-XXX
Go Back
Previous
Next
4
Do the PC units easily slide in and out of the machine? Go to the next
step.
Replace any
damaged PC units
or any damaged
erase lamp
assembly. See
“PC cartridge
unit removal” on
page 4-43, “K
erase lamp
assembly
removal” on
page 4-77, or
“CMY erase lamp
assembly
removal” on
page 4-76 .
5
Check that the transfer belt steering mechanism lock
packaging was fully removed. If not removed before the
transfer belt lever is lowered, the transfer belt steering
mechanism lock might break and remain inside the machine
in the area, as showing in the following image (A).
The following images show the transfer belt steering
mechanism lock.
Are there any remnants from the packaging?
Remove any
packaging
remnants.
Go to the next
step.
Step Check Yes No