Lexmark C935 - Page 98

2-6 Printer Service Manual
5057-XXX
Go Back
Previous
Next
287.00
Paper jam
Sensor (upper media exit)
late jam
The media is late reaching the sensor (upper media
exit) within the specified time after reaching the
sensor (finisher media entrance).
Refer to the Finisher Service Manual.
287.01
Paper jam
Sensor (upper media exit) lag
jam
The media reached the sensor (upper media exit)
but did not clear it within the specified time.
Refer to the Finisher Service Manual.
287.05
Paper jam
Sensor (upper media exit)
static jam
Media remains on the sensor (upper media exit).
Refer to the Finisher Service Manual.
288.00
Paper jam
Sensor (diverter gate) late
jam
The media is late reaching the sensor (diverter gate)
within the specified time after reaching the sensor
(bridge unit media exit).
Refer to the Finisher Service Manual.
288.01
Paper jam
Sensor (diverter gate) static
jam A (to top bin)
The media reached the sensor (diverter gate) but
did not clear it within the specified time.
Refer to the Finisher Service Manual.
288.04
Paper jam
Sensor (diverter gate) static
jam B (to stacker bin)
The media reached the sensor (diverter gate) but
did not clear it within the specified time.
Refer to the Finisher Service Manual.
289.00
Paper jam
Sensor (booklet media
entrance) late jam
The media is late reaching the sensor (booklet
media entrance) within the specified time after
reaching the sensor (bridge unit media exit).
Refer to the Finisher Service Manual.
289.01
Paper jam
Sensor (booklet media
entrance) lag jam
The media reached the sensor (booklet media
entrance) but did not clear it within the specified
time.
Refer to the Finisher Service Manual.
289.02
Paper jam
Sensor (booklet media
entrance) static jam
Media remains on the sensor (diverter gate).
Refer to the Finisher Service Manual.
289.03
Paper jam
Sensor (booklet compiler in)
static jam
Media remains on the sensor (booklet compiler in).
Refer to the Finisher Service Manual.
289.04
Paper jam
Sensor (booklet media exit)
late jam
The media is late reaching the sensor (booklet
media exit) within the specified time after the
booklet folding solenoid is turned on.
Refer to the Finisher Service Manual.
289.05
Paper jam
Sensor (booklet media exit)
lag jam
The media reached the sensor (booklet media exit)
but did not clear it within the specified time.
Refer to the Finisher Service Manual.
289.06
Paper jam
Sensor (booklet media exit)
static jam
Media remains on the sensor (booklet media exit).
Refer to the Finisher Service Manual.
31
Missing or
defective black
cartridge
Black toner cartridge
detection error
The Black toner cartridge is defective not installed.
Go to “Toner cartridge error” on page 2-138.
Error code or
message
Error contents Description/Action